Styrallyl Alcohol

Specification:
Appearance: Colorless liquid but becoming semi solid at room temperature.
Odor: Lilac, jasmine and acacia flower odor.
Relative density (25/25℃): 1.009 – 1.014.
Content (%): Not less than 99%.

Uses: Used in cosmetic, soap, detergent, fragrance and food essences, beauty care.

Styrallyl alcohol SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 07-Dec-20

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name & Other Names: Styrallyl alcohol or Alpha-Methylbenzyl alcohol.
CAS Number: 98-85-1
EINECS Number: 202-707-1
FEMA Number: 2685
Molecular Weight: 122.17
Molecular Formula: C8H10-O
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910

Flammable liquids Category 4, H227
Acute toxicity, oral Category 4, H302
Acute toxicity, dermal Category 5, H313
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 1, H318

Labelling according Regulation (EC) No 1272/2008

GHS Label Elements Irritant

GHS Label Elements Corrosive

Signal Words: Danger

Hazard Statements:
H227 Combustible liquid
H302 Harmful if swallowed.
H313 May be harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Precautionary Statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink, or smoke when using this product.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P285: In case of inadequate ventilation wear respiratory protection.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P304+341: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
P342+311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
P370+378: In case of fire: Use CO2, foam, or dry chemicals. for extinction. Do not use direct water jet on burning material.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P403+235: Store in a well-ventilated place. Keep cool.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi = Irritant.
C = Corrosive.
Risk Phrases:
R7 May cause fire.
R22 Harmful if swallowed.
R36 Irritating to skin.
R41 Risk of serious damage to eyes.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Product Name & Other Names: Styrallyl alcohol or Alpha-Methylbenzyl alcohol.
CAS Number.: 98-85-1
EINECS EC Number. 202-707-1
FEMA No.: 2685

4. FIRST-AID MEASURES

Always seek medical attention after first aid measures are provided.

Eye Contact: - Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
Skin Contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
Ingestion: Wash the mouth with water; seek medical advice immediately.
Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.

5. FIRE-FIGHTING MEASURES

Extinguishing Media Recommended: CO2, foam, dry chemicals.
Non-Recommended: Do not use direct water jet on burning material.
Extinguishing Procedure: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Avoid open flames or other sources of ignition.

7. HANDLING AND STORAGE

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids, alkali, or oxidizing agents. Keep air contact to a minimum.

8. EXPOSURE CONTROL

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, acids and alkalis.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Clear colorless liquid
Odor: Lilac, Jasmine, Mimosa.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Boiling Point (C): 204C.
Melting Point (C): 20C.
Flash point: 81C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Molecular Weight: 122.17
Molecular Formula: C8H10-O

10. STABILITY AND REACTIVITY

Reactivity: Presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali, or oxidizing agents.
Decomposition: Carbon monoxide and fumes of unidentified organic compounds may be formed during combustion.
Conditions to Avoid: Heat, spark, flame, direct sunlight, strong acids, alkali, or oxidizing agents.

11. TOXICOLOGICAL INFORMATION

LD 50 ORAL/RAT (mg/Kg) - 400
LD 50 DERMAL/RABBIT (mg/Kg) - 2,500
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. ECOLOGICAL INFORMATION

Toxicity to fish: LC50 - Leuciscus idus (Golden orfe) - 345 mg/l - 48 h.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. DISPOSAL CONSIDERATIONS

In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.

14. TRANSPORT REGULATIONS

DOT USA, TDG Canada & ADR/RID Europe
UN number: 2937 Class: 6.1 Packing group: III
Proper shipping name: alpha-METHYLBENZYL ALCOHOL, LIQUID
IMDG/IMO
UN number: 2937 Class: 6.1 Packing group: III
Proper shipping name: alpha-METHYLBENZYL ALCOHOL, LIQUID
IATA/ICAO
UN number: 2937 Class: 6.1 Packing group: III
Proper shipping name: alpha-METHYLBENZYL ALCOHOL, LIQUID

15. REGULATORY INFORMATION

SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Fire Hazard, Acute and Chronic Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H227 Combustible liquid
H302 Harmful if swallowed.
H313 May be harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi = Irritant.
C = Corrosive.
Risk Phrases:
R7 May cause fire.
R22 Harmful if swallowed.
R36 Irritating to skin.
R41 Risk of serious damage to eyes.

Certifications :
We manufacture Bulk Drugs / API, Excipients, Pharmaceuticals (IP/BP/USP/NF/Ph. Eur, JP/ CP), Speciality Chemicals(Pure/AR/ACS), Mineral Fortifiers, Food Chemical Codex (FCC) and Flavour chemicals. Our manufacturing facility is cGMP, GLP, ISO 9001, ISO 14001, ISO 22000, ISO/IEC 17025, FSSC 22000, FSSAI, Kosher, HALAL, EXCiPACT, WC, COPP, WHO-GMP and WC certified. We are also REACH registered for export to European countries.