• Contact No.: +91-22-23770100
  • Corporate: Sarifa Mansion, Chinchbunder, Mumbai

Phenethyl Salicylate

Aromatic; Flavors & Fragrances

Phenethyl Salicylate

CAS Number 93-18-5
Molecular Weight 172 g/mol
Chemical Formula C12 H12 O
EINECS EC Number ---
FEMA ---

Chemical/Trade Names: beta-naphthol ethylether
Odor Description: FLORAL VERY TENACIOUS NEROLIN
Application: Stable in soap, very resistant to heat. Used in household products, Daily Flavor, Food Flavor, Tobacco Flavor.
CAS Number: 93-18-5
Molecular weight: 172
Molecular Formula: C12 H12 O
Purity: Min 96% (99%Typical)
Solubility: INSOLUBLE IN WATER
Use level: 0.1 to 5 ppm in finished products


1 IDENTIFICATION OF THE SUBSTANCE

Product Name & Other Names: Nerolin Bromelia or Ethyl Naphthyl Ether.
Synonyms : 2-Ethoxynaphthalene, Ethyl 2-naphthyl ether, Neroline
CAS Number: 93-18-5
EINECS EC Number: 202-226-7
FEMA Number: 2768
Formula : C12H12O
Molecular weight: 172
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.

NEROLIN BROMELIA, Ethyl Naphthyl Ether SDS GHS, SAFETY DATA SHEET
MSDS Sheet,
MATERIAL SAFETY DATA SHEET 07-Dec-20

Product Name & Other Names: Nerolin Bromelia or Ethyl Naphthyl Ether.
Synonyms : 2-Ethoxynaphthalene, Ethyl 2-naphthyl ether, Neroline
CAS Number: 93-18-5
EINECS EC Number: 202-226-7
FEMA Number: 2768
Formula : C12H12O
Molecular weight: 172
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.

Precautionary statements:
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P362: Take off contaminated clothing and wash before reuse.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.


4 FIRST-AID MEASURES INHALATION

Always seek medical attention after first aid measures are provided.

Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.
Ingestion: NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Immediately rinse mouth and provide fresh air. Get medical attention if any discomfort continues.
Skin Contact: Remove affected person from source of contamination. Remove contaminated clothing and affected body parts with soap and water. Get medical attention if any discomfort continues.
Eye Contact: Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.


5 FIRE-FIGHTING MEASURES EXTINGUISHING MEDIA

Suitable extinguishing media: Water spray. Foam, carbon dioxide or dry powder.
Special hazards arising from the substance or mixture: Carbon oxides
Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.


6 ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container. Avoid open flames or other sources of ignition.


7 HANDLING AND STORAGE

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids, alkali, or oxidizing agents. Keep contact to a minimum. Keep away from ignition sources and naked flame.


8 EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection: Avoid to breath directly on the product. Apply local ventilations when appropriate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.


9 PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Off-white to beige color powder, dust, crystals.
Odor: Mild (or faint). Aniseed.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: 37C.
Initial boiling point and boiling range: 282C.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Formula: C12H12O
Molecular Weight: 172.22


10. STABILITY AND REACTIVITY

Stable under normal temperature conditions.
Avoid excessive heat for prolonged periods of time.
Hazardous Polymerization
: Will not occur.
Materials to Avoid: Strong oxidizing substances.
Hazardous Decomposition Products: Toxic gases/vapors/fumes of: Oxides of: Carbon.


11 TOXICOLOGICAL INFORMATION

LD 50 Oral Rat - 3110 mg/kg
LD50 Dermal - Rabbit - > 5.000 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.


12 ECOLOGICAL INFORMATION

Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.


13 DISPOSAL CONSIDERATIONS

Contact specialist disposal companies. Dissolve or mix the material with a combustible solvent. Burn in chemical incinerator equipped with an afterburner and scrubber Observe all regulations.


14 TRANSPORT INFORMATION

DOT USA, TDG Canada & ADR/RID Europe:
General LQ Number: 27
Proper Shipping Name Environmentally Hazardous Substance, Solid, N.O.S. (2-Ethoxynaphthalene).
Un No. 3077 Class 9
Pack Group III
IMDG/IMO & IATA/ICAO:
General LQ Number: 27
Proper Shipping Name Environmentally Hazardous Substance, Solid, N.O.S. (2-Ethoxynaphthalene).
Un No. 3077 Class 9
Pack Group III


15 REGULATORY INFORMATION

USA:
California Proposition 65
: Not listed.
SARA 311/312 Hazards: See section 2.


16 OTHER INFORMATION

European Labeling in Accordance with EC Directives:
H315 = Causes skin irritation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xi Irritant
Risk Phrase:
R38 = Irritating to skin.


Certifications :
We manufacture Bulk Drugs / API, Excipients, Pharmaceuticals (IP/BP/USP/NF/Ph. Eur, JP/ CP), Speciality Chemicals(Pure/AR/ACS), Mineral Fortifiers, Food Chemical Codex (FCC) and Flavour chemicals. Our manufacturing facility is cGMP, GLP, ISO 9001, ISO 14001, ISO 22000, ISO/IEC 17025, FSSC 22000, FSSAI, Kosher, HALAL, EXCiPACT, WC, COPP, WHO-GMP and WC certified. We are also REACH registered for export to European countries.