Magnesium Chloride

Muby Chemicals, established in 1976, is the pioneer manufacturer of Chlorides, and particularly Magnesium Chloride including Magnesium Chloride Anhydrous, Hexahydrate & Magnesium Chloride IP BP USP Analytical Grade FCC Food Grade, Crystals Powder Lumps etc. We know about Magnesium Chloride better than any other vendor in the world.

Magnesium Chloride USP

MgCl2.6H2O 203.30
Magnesium Chloride USP
Magnesium Chloride Hexahydrate USP [CAS 7791-18-6].
Magnesium Chloride Anhydrous USP95.21 [CAS 7786-30-3].

Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where the product is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter— not more than 0.005% is found.
Sulfate — A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium— Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium— the limit is 0.01%.
Potassium— Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 µg per g.
Heavy metals — the limit is 0.001%.
Organic volatile impurities: meets the requirements.

Magnesium Chloride BP Ph Eur Grade Specifications

MgCl2.6H2O
Magnesium Chloride BP
Magnesium Chloride Hexahydrate BP [CAS 7791-18-6].
Magnesium Chloride Anhydrous BP 95.21 [CAS 7786-30-3].

DEFINITION
Content
98.0 per cent to 101.0 per cent of MgCl2,6H2O.

CHARACTERS
Appearance
Colourless crystals, hygroscopic.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).

IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.

TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides
Maximum 500 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 0.1 per cent.
Iron
Maximum 10 ppm, determined on solution S.
Potassium
Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals
Maximum 10 ppm.
Water
51.0 per cent to 55.0 per cent, determined on 50.0 mg.

Magnesium Chloride FCC Food Grade, US Food Chemical Codex

MgCl2·6H2O Formula weight 203.30

DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.

Magnesium chloride (E511 is an important coagulant used in the preparation of cheese and tofu. In Japan it is sold as nigari (derived from the Japanese word for "bitter"), In China, it is called lushui. Nigari or lushui consists mostly of magnesium chloride, with some magnesium sulfate and other trace elements. It is also an ingredient in baby formula milk.

Magnesium Chloride HexahydrateAnalytical Reagent Specifications

Magnesium Chloride
MgCl2 . 6H2O
Formula weight 203.30
CAS Number 7791-18-6

REQUIREMENTS
Assay: -------------- 99.0-102.0% MgCl2 . 6H2O

MAXIMUM ALLOWABLE
Insoluble matter: --- 0.005%
Nitrate (NO3): ------ 0.001%
Phosphate (PO4): ---- 5 ppm
Sulfate (SO4): ------ 0.002%
Ammonium (NH4): ----- 0.002%
Barium (Ba): -------- 0.005%
Calcium (Ca): ------- 0.01%
Manganese (Mn): ----- 5 ppm
Potassium (K): ------ 0.005%
Sodium (Na): -------- 0.005%
Strontium (Sr): ----- 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): ---------- 5 ppm.

Certifications :
We manufacture Bulk Drugs / API, Excipients, Pharmaceuticals (IP/BP/USP/NF/Ph. Eur, JP/ CP), Speciality Chemicals(Pure/AR/ACS), Mineral Fortifiers, Food Chemical Codex (FCC) and Flavour chemicals. Our manufacturing facility is cGMP, GLP, ISO 9001, ISO 14001, ISO 22000, ISO/IEC 17025, FSSC 22000, FSSAI, Kosher, HALAL, EXCiPACT, WC, COPP, WHO-GMP and WC certified. We are also REACH registered for export to European countries.