HP HT Lube

HP HT Lube:

General Description :

HP-HT Lube is a High-Tech polymer lubricant concentrate specifically developed for highly deviated or horizontal drilling applications for both land and offshore use. HP-HT Lube has a high affinity for metal surfaces, and will adhere tenaciously to drill pipe and drill collars. This guarantees that the lubricant will be concentrated exactly where it is needed, between the pipe and the formation. The pipe can then slide effectively without excessive loss of weight to the bit. HP-HT Lube eliminates torque and drag, prevents differential sticking, and protects the drill pipe from corrosion.

Typical Physical Properties

Form, @ 70°F: Liquid
Density, (lbs/Gal): 7.68
Flash Point, °F (TCC): >200
Pour Point, °F: < 0
pH, ( 5% in 3:1 IPA / water): 5.5 – 7.5
Solubility:
Fresh Water: Dispersible
High TDS Brine: Dispersible
Isopropanol: Soluble
Xylene: Soluble

Recommended Use

The extreme efficiency of this product allows for low use levels. For a typical 800-1000 bbl system, 2 bbl slowly (one bbl per hour). Maintain the system as needed while drilling. Always add the product s-l-o-w-l-y into the suction pit as close to the suction line as possible. HP-HT Lube is an oil soluble product and will not mix readily with the drilling fluid.