Guar gum, also called guaran, is primarily the ground endosperm of guar beans. The guar seeds are dehusked, milled and screened to obtain the guar gum. It is typically produced as a free-flowing, off-white powder. The guar bean is principally grown in India, Pakistan, USA, Australia and Africa. India produces 2.5 - 3.5 million tons of guar annually, making it the largest producer with about 80% of world production. Chemically, guar gum is a polysaccharide composed of the sugars galactose and mannose.
Guar gum retards ice crystal growth nonspecifically by slowing mass transfer across the solid/liquid interface. It shows good stability during freeze-thaw cycles. It is therefore used in gluten free ice cream. Guar gum is a hydrocolloid particularly useful for making thick pastes without forming a gel and for keeping water bound in a sauce or emulsion. Guar gum can be used for thickening cold and hot liquids, to make hot gels, light foams and as an emulsion stabilizer. Guar gum can be used for cottage cheese i.e. PANEER, DAHI i.e. curd or yogurt, sauces, soups and frozen desserts. Guar gum is also a good source of fiber with 80 % soluble dietary fiber on a dry weight basis.
It is used in Textile, Paper, Explosives, Pharmaceutical, Cosmetics, toothpastes, shampoos, toiletries and Hydraulic fracturing Shale oil and gas extraction industries.
We can offer both technical grade for Hydraulic fracturing Shale oil and gas extraction industries and for Food and Pharmaceutical Industry.
Guar Gum USP NF
Guar Gum is a gum obtained from the ground endosperms of Cyamopsis tetragonolobus (Linné) Taub. (Fam. Leguminosae). It consists chiefly of a high molecular weight hydrocolloidal polysaccharide, composed of galactan and mannan units combined through glycosidic linkages, which may be described chemically as a galactomannan.
Identification:
A: Place about 2 g in a 400-mL beaker, moisten it with about 4 mL of isopropyl alcohol, add 200 mL of cold water with vigorous stirring, and continue stirring until the gum is completely and uniformly dispersed: an opalescent, viscous solution results.
B: Place about 100 mL of the solution prepared in Identification test A in a 400-mL beaker, heat in a boiling water bath for about 10 minutes, and cool: no appreciable increase in viscosity is produced (distinction from locust bean gum).
Tests:
Loss on drying: Dry it at 105 for 5 hours: it loses not more than 15.0% of its weight.
Total ash: not more than 1.5% of ash.
Acid-insoluble matter: Transfer about 1.5 g of Guar Gum, accurately weighed, to a 250-mL beaker containing 150 mL of water and 1.5 mL of sulfuric acid. Cover the beaker with a watch glass, and heat the mixture on a steam bath for 6 hours, rubbing down the wall of the beaker frequently with a rubber-tipped stirring rod, and replacing any water lost by evaporation. At the end of the 6-hour heating period add about 500 mg of a suitable filter aid, accurately weighed, and filter through a suitable tared, ashless filter. Wash the residue several times with hot water, dry the filter and its contents at 105 for 3 hours, cool in a desiccator, and weigh: the amount of acid-insoluble matter, determined by subtracting the weight of filter aid from that of the residue, is not more than 7.0% of the Guar Gum taken.
Arsenic: 3 ppm.
Lead: the limit is 0.001%.
Heavy metals: 0.002%.
Protein: not more than 10.0% of the Guar Gum taken.
Starch: To a 1 in 10 solution of Guar Gum add a few drops of iodine TS: no blue color is produced.
Content of galactomannans: Subtract from 100.0 the total percentages of Loss on drying, Total ash, Acid-insoluble matter, and Protein: the content of galactomannans is not less than 66.0%.
Guar Gum FCC Food Grade
INS: 412 CAS: [9000-30-0]
DESCRIPTION
Guar Gum occurs as a white to yellow-white powder. It is a gum obtained from the ground endosperms of Cyamopsis tetragonolobus (L.) Taub (Fam. Leguminosae) (synonym Cyamopsis psoraloides [Lam.] D.C.). It consists chiefly of a high-molecular-weight polysaccharide composed of galactose and mannose units and may be described chemically as a galactomannan. It is dispersible in either hot or cold water, forming a sol, having a pH between 5.4 and 7.0, that may be converted to a gel by the addition of small amounts of sodium borate.
Function: Stabilizer; thickener; emulsifier.
REQUIREMENTS
Identification
A. Transfer a 2-g sample into a 400-mL beaker, moisten it thoroughly with about 4 mL of isopropyl alcohol, add, with vigorous stirring, 200 mL of cold water, and continue to stir until the gum is completely and uniformly dispersed. An opalescent, viscous dispersion forms.
B. Transfer 100 mL of the dispersion prepared in Identification Test A into another 400-mL beaker, heat the mixture in a boiling water bath for about 10 min, and then cool to room temperature. No appreciable increase in viscosity develops.
Acid-Insoluble Matter: Not more than 7.0%.
Ash: (Total) Not more than 1.5%.
Galactomannans: Not less than 70.0%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 15.0%.
Protein: Not more than 10.0%.
Starch: Passes test.
Agglomerated guar gum powder granules:
Apart from this we agglomerate guar gum powder in to granules so that all the properties of powder are retained without the mess of powder. You can call it easily-dispersible dustless guar gum granules. Unlike in case of powder, no 'fisheye' is formed in dissolving and guar gum is quickly dissolved. The nuisance of dust is avoided.
Certifications :
We manufacture Bulk Drugs / API, Excipients,
Pharmaceuticals (IP/BP/USP/NF/Ph. Eur, JP/ CP), Speciality Chemicals(Pure/AR/ACS), Mineral
Fortifiers, Food Chemical Codex (FCC) and Flavour chemicals. Our manufacturing facility is
cGMP,
GLP, ISO 9001, ISO 14001, ISO 22000, ISO/IEC 17025, FSSC 22000, FSSAI, Kosher, HALAL,
EXCiPACT, WC,
COPP, WHO-GMP and WC certified. We are also REACH registered for export to European
countries.