Alpha Amyl Cinnamic Aldehyde

Name : Alpha Amyl Cinnamic Aldehyde
Classification : Aromatic Aldehyde
Synonyms : 2-Benzylidene Heptanal
Molecular Formula : C 14 H 18 O
Molecular Weight : 202.29
Appearance : Yellow to pale yellow liquid
Odor : Characteristic sweet, floral, jasmine odor
Purity by wt% by GLC : 98.00
Density (g/cm3) : 0.965 to 0.969
Flash Point : 94C (Closed cup)
Acid Value (max) : 1.00

Uses: Acid Cleaner Liquid, Detergent, Alcoholic Lotion, Fabric Softener, Anti Perspirant, Foam Bath, Bleach, Hard Surface Cleaner, Deo Stick, Shampoo, Detergent Perborate, Soap.

ALPHA AMYL CINNAMIC ALDEHYDE SDS, SAFETY DATA SHEET
MSDS SHEET, MATERIAL SAFETY DATA SHEET 06-Dec-20

1. PRODUCT AND COMPANY IDENTIFICATION

ProductName & Other Names: Alpha amyl cinnamic aldehyde or Alpha amyl cinnamaldehyde.
CAS Number: 122-40-7
EINECS EC Number: 204-541-5
Molecular Formula: C6H5CH=C[(CH2)4CH3]CHO
Molecular Weight: 202.29
Relevant uses and uses advised against (if any): Industrial use only.
Supplier: As per letterhead.

2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Hazard Statements:
H317: May cause an allergic skin reaction.
H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P363: Wash contaminated clothing before reuse.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+352: IF ON SKIN: Wash with soap and water.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful.
N Dangerous for the environment.
Risk Phrases:
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

3. COMPOSITION / INFORMATION ON INGREDIENTS

Product Name & Other Names: Alpha amyl cinnamic aldehyde or Alpha amyl cinnamaldehyde.
CAS Number: 122-40-7
EINECS EC Number: 204-541-5

4. FIRST-AID MEASURES

Always seek medical attention after first aid measures are provided.

Eye Contact: Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
Skin Contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
Ingestion: Wash the mouth with water; seek medical advice immediately.
Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.

5. FIRE-FIGHTING MEASURES

Extinguishing Media Recommended: CO2, foam, dry chemicals.
Non-Recommended: Do not use direct water jet on burning material.
Extinguishing Procedure: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment(waterproof boots, suitable protective clothing, safety glasses, etc.). Restrictunprotected personnel from the area. Prevent any contact with hot surfaces. Donot approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container. Avoid open flames or other sources of ignition.

7. HANDLING AND STORAGE

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids, alkali, or oxidizing agents.
Fire Protection: Keep away from ignition sources and naked flame.

8. EXPOSURE CONTROL

Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection: Avoid to breath directly on the product. Apply local ventilations when appropriate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountainand quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Alpha amyl cinnamic aldehyde is pale yellow to yellowish clear mobile liquid.
Odor: Floral, Jasmin Character.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.97
Melting point/freezing point: <0C.
Initial boiling point and boiling range: 287C.
Flash point: 146C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Molecular Formula: C6H5CH=C[(CH2)4CH3]CHO
Molecular Weight: 202.29

10. STABILITY AND REACTIVITY

Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali, or oxidizing agents.
Decomposition: Carbon monoxide and unidentified organic compounds may be formed during combustion.

11. TOXICOLOGICAL INFORMATION

LD 50 ORAL/RAT (mg/Kg): 3730
LD 50 DERMAL/RABBIT (mg/Kg): > 2000
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. ECOLOGICAL INFORMATION

Toxicity to fish: LC50 - Danio rerio (zebra fish) - 3 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 1.1 mg/l - 48 h
Toxicity to algae: EC50 - Algae - 1.89 mg/l - 72 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Precautions: Prevent contamination of soil, ground and surface water.

13. DISPOSAL CONSIDERATIONS

In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.

14. TRANSPORT REGULATIONS

DOT USA, TDG Canada & ADR/RID Europe:
UN Number: 3082
Class: 9
Packing group: III.
IMDG/IMO & IATA/ICAO:
UN Number: 3082
Class: 9
Packing group: III.

15. REGULATORY INFORMATION

USA regulations:
SARA 304 Emergency release notification: Not regulated.
SARA 302 Extremely hazardous substance: Not listed.
SARA 311/312 Hazardous chemical: See section 2.
SARA 313 (TRI reporting): Not regulated.
US - California Proposition 65 - Carcinogens & Reproductive Toxicityn (CRT): Not listed.

16. Other Information

European Labeling in Accordance with EC Directives:
H317: May cause an allergic skin reaction.
H411: Toxic to aquatic life with long lasting effects.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful.
N Dangerous for the environment.
Risk Phrases:
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Certifications :
We manufacture Bulk Drugs / API, Excipients, Pharmaceuticals (IP/BP/USP/NF/Ph. Eur, JP/ CP), Speciality Chemicals(Pure/AR/ACS), Mineral Fortifiers, Food Chemical Codex (FCC) and Flavour chemicals. Our manufacturing facility is cGMP, GLP, ISO 9001, ISO 14001, ISO 22000, ISO/IEC 17025, FSSC 22000, FSSAI, Kosher, HALAL, EXCiPACT, WC, COPP, WHO-GMP and WC certified. We are also REACH registered for export to European countries.